Images or artwork printed with foil effects will darken slightly and some gradient range will be lost. Consider lightening images before printing for a better result.

If you would like only silver foil effects to print, make sure to have at least 15% K over the foil for higher quality silver colour, as well as to prevent chipping or flaking.

Foil effects allows you to design with full coverage and full bleed, unlike foil stamping that is limited 50% of the coverage and no bleed of the foil.

Knockouts are the spaces in the foil effects mask or in the CMYK print file. Be aware there might be a "halo" of white around the knockout area. Although registration is better than traditional foil stamping, it will not be exact.

Do not design using foil effects on very thin or small text or artwork. For best results, use large areas or fonts 12pt and above. Sans-serif fonts 10 point or above will also work.

Foil effects works best on lighter colours. The darker and more saturated the colour is, the less effect the foil effect will have.

Foil stamping is the true and traditional form of adding foil to your project. Foil stamping is limited to under 50% coverage, cannot bleed and is not suited to complex designs. Foil effects allows almost unlimited foil colours amd gradients, and can be used for intricate designs. We offer traditional foil stamping on our Flexographic Printed Stickers while foil effects is only printed on our Offset Stickers.

CMYK Process colours in the grey range and de-saturated images can shift in colour throughout the print run and may cause the greys to appear either cooler or warmer. For a neutral grey, we recommend converting all grey values and de-saturated images to true greyscale consisting of K (black) only values.

For the richest of deep dark blacks in print, use 50/40/40/100 as the CMYK value. If printing small black text (or knocked out text), we recommend a k only black (0/0/0/100) to avoid misregistration issues.

Due to the nature of club-run printing, you may experience colour variation in solid fills of blue. For great blue results, we recommend a 30% difference between your Cyan and Magenta levels to ensure a nice rich dark blue, rather than purple.

Colours under the UV gloss coating will appear slightly darker and richer than on a sticker with no coating.